Electrical Safety Tips In The Workplace

By |

Electrical-Safety-Tips-In-The-Workplace.jpg

Once a simple electrical irregularity is neglected, the whole commercial building may be at risk of accidents like fires in just the blink of an eye. That is why safety should be a top priority when it comes to your workplace, especially that it employs countless workers. To ensure commercial buildings are safe, here are five useful electrical safety tips.

Look For Damaged Outlets

Wall outlets are susceptible to wear and tear. When they wear out, the metal contact points may lose their grip into the cords, and as a result, it might cause heat build-up. If left unmonitored, this may easily blow up and create a fire accident. Remember to regularly check the outlets in your workplace and keep an eye on damaged outlets that need replacement.

Change frayed Cords

Frayed or worn cords are common fire-starters. The protective layers of a frayed cable are tattered, revealing the stripped wire and holding the electrical current exposed in the air. These wires can heat up and may ignite nearby combustible materials like rugs, curtains, or papers. Check your cables and cords regularly and replace them if necessary.

Avoid The Use Of Extension Cords

As much as possible, please refrain from using extension cords as they are often the primary cause of electric shocks and fires. Although it is the go-to for most establishments, it may not be able to handle extra current, especially if it’s fully loaded.

If possible, call your trusted electrician at Scott Electric to install as many wall outlets in your workplace. Check out their website at http://scottelectricdfw.com/ to get an electrical safety evaluation of your building and install additional wall outlets. 

Have Designated Circuit Breakers

The most commonly-used appliance in every commercial establishment is a floor-mounted air conditioner. It usually consumes about 6,000 watts, while a desktop consumes around 250 watts. These machines vary in electric consumption and run on different amp levels in circuits, which are all connected to a circuit breaker box.

With many high electric-consuming devices, the circuit may not be able to handle too much current at the same time. The additional electrical flow may cause the insulation to melt and start a fire. It’s essential to install designated circuit breakers to handle different groups of appliances and prevent further accidents.

Unplug Cords When Not In Use

To avoid an overcurrent, turn off fixtures and appliances when not in use. Better yet, unplug cables of commercial equipment and devices if the space is empty. Not only are you ensuring everyone’s safety, but you are saving electric consumption as well.

Conclusion:

Remember to follow these electrical safety tips in your workplace, and you’ll be safe from harm! To ensure you have a secured electrical system, reach out to Scott Electric, one of the best electric companies in Texas, by clicking this link http://scottelectricdfw.com/.